Plate Type High Gradient Magnetic Separator_佛山市高明星源機械有限公司

Plate Type High Gradient Magnetic Separator

Application：

The machine is suitable for the weakly magnetic minerals and non-metallic minerals that particle size less than 5mm. Such as: mica powder, quartz, feldspar, nepheline, fluorite, sillimanite, spodumene, kaolin, manganese ore, weakly magnetic ore, pyrrhotite, roasted ore, ilmenite, hematite, limonite, siderite, chromite, wolframite, tantalum niobium ore and red mud etc. Also can apply in coal, non-metallic minerals and building materials industry.

Welcome to call0757-8886-0308,Consulting and ordering 雙語對照

Detailed

Features：

The magnetic system of this machine adopts advanced computer simulation design and the magnetic pole arrangement, effectively protect iron maximum adsorption area and adsorption capacity within the working scope.
All magnetic materials are used high strength rare earth neodymium iron boron to made into magnetic core, the neodymium iron boron with high purity, larger dosage, strong magnetic field, the highest magnetic field is up to 15000GS. It belongs to the revolutionary breakthrough in the high gradient magnetic separation machine field, the performance is in a world leading level.With the most optimized design, a complete sealed structure magnetic system and anti oxidation, the machine can be normally used in harsh environment for ten years if the consumption of magnetic power not exceed to 5%.
The driving part adopts the stepless speed regulation motor with excellent performance, the full-automatic continuous working and the iron unloading, so saving manpower, reliable operation and no failure. The feeding system adopts motor mixing structure, make the material into magnetic separation area and distribute evenly, and pulp concentration reach the beneficiation requirement, separation effect will be more effective and satisfactory.
Water supply system uses a single inlet, sub valve control of the water point. It is convenient for customer to match water equipment, each valve can be opened and adjusted according to the actual needs.
The material contact parts are made from stainless steel or non magnetic material, which effectively avoid the second pollution cause by the machine material. Depending on the minerals, the important parts will be wear resistance treatment. It can be made into open or complete sealed structure according to the actual situation, also can meet the different requirements of different customers and sites.

Parameters：

Model	Dimension of magnetic separation area	Processing capacity(t/h)	The highest magnetic field	Particle size	Power
XYGP-616	600×1600	1-3	13000-15000 GS	≤5 mm	1.1 kw
XYGP-622	600×2200	3-5			1.5 kw
XYGP-918	900×1800	5-10			2.2 kw
XYGP-924	900×2400	10-15			3.0 kw
XYGP-1224	1200×2400	15-20			4.0 kw
XYGP-1524	1500×2400	20-25			5.5 kw
XYGP-1824	1800×2400	25-30			7.5 kw
XYGP-1830	1800×3000	30-35			11 kw

Prev Next:none